I am awaiting a 6809 pod to arrive (someday) and will dissect it in time to try and see how easy it would be to modify another pod to do that. Perhaps a multi-pod is what some bright person here needs to design! I believe Al has schematics on spies for this and some of the other pods... I have a few original manuals in my shelves if the schematics aren't too clear, I could copy and put up somewhere. Would someone like to host this project? John :-#)# At 02:28 PM 3/2/2000 -0500, Thomas43@aol.com wrote:

In a message dated 3/2/00 11:25:29 AM, KKlopp@EROLS.COM writes:

<< How much effort would it be to build a 6809 pod from scratch?

Documentation for the Fluke 90 also mentioned a 6809 version but I've never

seen one.

Kev >>

Basically nothing. It's just a board with a bunch of inputs from the cat box, the lines cross all over the place, and then come out the other side in a different configuration. I think there is one small cap and one 2n2904 transistor on the board. It looks like a $2 board (that they sold for several hundred). I may have the schematics for all of these pods that I can scan and post.

Scott

To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request@flippers.com. Please direct other questions, comments, or problems to jrr@flippers.com.

John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) http://www.flippers.com "Old pinballers never die, they just flip out."