At 21:25 8 11 2004, you wrote:

For a working 6502 pod, find a 6800 and pop in a 6502 CPU, and a couple of changes on the pod PCB. Check the schematics (soon to be back up!) in the PDF for the 6502 pod. The same Eprom code is used in each, the lower half is 6800 and the upper half is 6502! I figure it would be fairly simple to hack a pod so it would do both CPUs...I see a hole with a 40 pin ZIF socket, and a toggle switch....

Yes I've seen that on the schematics, alas both my 6800 PODS are different to the jumper switchable one :o( I tried doing a major hack on one of them to try and upgrade it to match the alternate 6800 (&6502) POD but I could never get it to pass self test :o( Dave Langley www.robotron-2084.co.uk _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist