I’ve tried to send this message a few times, but it seems to be going into a black hole for some reason. In any case, does anyone have a good dump of the tape necessary to run the async clock probe? I have a 9010a console with the option, and the probe, but the tape with the program to run it is missing. I found some dumps, but they’re incomplete. A Fluke hex dump that I can upload via the serial port would be ideal, my 9010a doesn’t have a working tape drive. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/