searching for Fluke TK80A Rev C schematic and Fluke TestWriter software
Hello: I´m searching for the schematic of the Fluke TK80 trainer board: I have the Fluke TK80A Rev C trainer board, this board has a foil keypad (has no keyboard keys), but all the documentation in the ftp site is for the first release of Fluke TK80 board (keyboard with keys), someone has the schematic of the TK80A Rev C board I have? The Fluke TK80A board is based on 8080 processor and is a trainer board to be used in conjunction with the Fluke 9010A tester. Also I´m searching for the Fluke TestWriter software (option 9020A-925) This software enables you to use the PC as a datalogger, controller,..with the Fluke 9010A attached to the PC serial port (if the Fluke 9010A has the GF option installed) I have searched the ftp site but no luck. I have been able to find the utilities program tape programs, such programs are posted (side A and side B of tape) in ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010A%20Tapes/Utility_Programs_Tape/ thanks _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
On 2019/10/07 8:16 a.m., Gonzalo Fernandez wrote:
Hello:
I´m searching for the schematic of the Fluke TK80 trainer board: I have the Fluke TK80A Rev C trainer board, this board has a foil keypad (has no keyboard keys), but all the documentation in the ftp site is for the first release of Fluke TK80 board (keyboard with keys), someone has the schematic of the TK80A Rev C board I have? The Fluke TK80A board is based on 8080 processor and is a trainer board to be used in conjunction with the Fluke 9010A tester.
Also I´m searching for the Fluke TestWriter software (option 9020A-925) This software enables you to use the PC as a datalogger, controller,..with the Fluke 9010A attached to the PC serial port (if the Fluke 9010A has the GF option installed)
I have searched the ftp site but no luck. I have been able to find the utilities program tape programs, such programs are posted (side A and side B of tape) in ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010A%20Tapes/Utility_Programs_Tape/
thanks
Hi Gonzalo, Any luck finding the TestWriter software? I'm looking at the V4#3 Fluke Troubleshooter and that program looks like it would be useful! John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Hello: No luck, still searching the Fluke TK80A Rev C schematic and TestWriter software, if you have any of these items let me know. thanks ________________________________ De: Techtoolslist <techtoolslist-bounces@flippers.com> en nombre de John Robertson via Techtoolslist <techtoolslist@flippers.com> Enviado: viernes, 28 de febrero de 2020 20:59 Para: techtoolslist@flippers.com <techtoolslist@flippers.com> Cc: John Robertson <jrr@flippers.com> Asunto: Re: [Techtoolslist] searching for Fluke TK80A Rev C schematic and Fluke TestWriter software On 2019/10/07 8:16 a.m., Gonzalo Fernandez wrote:
Hello:
I´m searching for the schematic of the Fluke TK80 trainer board: I have the Fluke TK80A Rev C trainer board, this board has a foil keypad (has no keyboard keys), but all the documentation in the ftp site is for the first release of Fluke TK80 board (keyboard with keys), someone has the schematic of the TK80A Rev C board I have? The Fluke TK80A board is based on 8080 processor and is a trainer board to be used in conjunction with the Fluke 9010A tester.
Also I´m searching for the Fluke TestWriter software (option 9020A-925) This software enables you to use the PC as a datalogger, controller,..with the Fluke 9010A attached to the PC serial port (if the Fluke 9010A has the GF option installed)
I have searched the ftp site but no luck. I have been able to find the utilities program tape programs, such programs are posted (side A and side B of tape) in ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010A%20Tapes/Utility_Programs_Tape/
thanks
Hi Gonzalo, Any luck finding the TestWriter software? I'm looking at the V4#3 Fluke Troubleshooter and that program looks like it would be useful! John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Do either of you have a 9010a with GFI option? It seems to be very rare. I have one with it that I've been meaning to tear down and document, but haven't gotten to it. On February 29, 2020 2:15:34 AM PST, Gonzalo Fernandez <gfernval@hotmail.com> wrote:
Hello:
No luck, still searching the Fluke TK80A Rev C schematic and TestWriter software, if you have any of these items let me know.
thanks
________________________________ De: Techtoolslist <techtoolslist-bounces@flippers.com> en nombre de John Robertson via Techtoolslist <techtoolslist@flippers.com> Enviado: viernes, 28 de febrero de 2020 20:59 Para: techtoolslist@flippers.com <techtoolslist@flippers.com> Cc: John Robertson <jrr@flippers.com> Asunto: Re: [Techtoolslist] searching for Fluke TK80A Rev C schematic and Fluke TestWriter software
On 2019/10/07 8:16 a.m., Gonzalo Fernandez wrote:
Hello:
I´m searching for the schematic of the Fluke TK80 trainer board: I have the Fluke TK80A Rev C trainer board, this board has a foil keypad (has no keyboard keys), but all the documentation in the ftp site is for the first release of Fluke TK80 board (keyboard with keys), someone has the schematic of the TK80A Rev C board I have? The Fluke TK80A board is based on 8080 processor and is a trainer board to be used in conjunction with the Fluke 9010A tester.
Also I´m searching for the Fluke TestWriter software (option 9020A-925) This software enables you to use the PC as a datalogger, controller,..with the Fluke 9010A attached to the PC serial port (if the Fluke 9010A has the GF option installed)
I have searched the ftp site but no luck. I have been able to find the utilities program tape programs, such programs are posted (side A and side B of tape) in ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010A%20Tapes/Utility_Programs_Tape/
thanks
Hi Gonzalo,
Any luck finding the TestWriter software? I'm looking at the V4#3 Fluke Troubleshooter and that program looks like it would be useful!
John :-#)#
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
On 2020/02/29 8:25 a.m., Ian Eure wrote:
Do either of you have a 9010a with GFI option? It seems to be very rare.
I have one with it that I've been meaning to tear down and document, but haven't gotten to it.
That and the TestWriter software appears to be a holy grail! Can you take some pictures of the GFI module so we could see if it was possible to reproduce it? I am hunting down the TestWriter software and documentation through Shy @ Navatek using the part numbers from the story on V4#3 of the Tech Tips. I assume no one else has the documents for TestWriter either, so let's see what Shy can turn up. He has been a big help over the years in compiling stuff for the 9XXX series! Someone should take him out for coffee! Thanks, John :-#)#
On February 29, 2020 2:15:34 AM PST, Gonzalo Fernandez <gfernval@hotmail.com> wrote:
Hello:
No luck, still searching the Fluke TK80A Rev C schematic and TestWriter software, if you have any of these items let me know.
thanks
________________________________ De: Techtoolslist <techtoolslist-bounces@flippers.com> en nombre de John Robertson via Techtoolslist <techtoolslist@flippers.com> Enviado: viernes, 28 de febrero de 2020 20:59 Para: techtoolslist@flippers.com <techtoolslist@flippers.com> Cc: John Robertson <jrr@flippers.com> Asunto: Re: [Techtoolslist] searching for Fluke TK80A Rev C schematic and Fluke TestWriter software
On 2019/10/07 8:16 a.m., Gonzalo Fernandez wrote:
Hello:
I´m searching for the schematic of the Fluke TK80 trainer board: I have the Fluke TK80A Rev C trainer board, this board has a foil keypad (has no keyboard keys), but all the documentation in the ftp site is for the first release of Fluke TK80 board (keyboard with keys), someone has the schematic of the TK80A Rev C board I have? The Fluke TK80A board is based on 8080 processor and is a trainer board to be used in conjunction with the Fluke 9010A tester. Also I´m searching for the Fluke TestWriter software (option 9020A-925) This software enables you to use the PC as a datalogger, controller,..with the Fluke 9010A attached to the PC serial port (if the Fluke 9010A has the GF option installed) I have searched the ftp site but no luck. I have been able to find the utilities program tape programs, such programs are posted (side A and side B of tape) in ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010A%20Tapes/Utility_Programs_Tape/ thanks Hi Gonzalo,
Any luck finding the TestWriter software? I'm looking at the V4#3 Fluke Troubleshooter and that program looks like it would be useful!
John :-#)#
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
participants (3)
-
Gonzalo Fernandez -
Ian Eure -
John Robertson via Techtoolslist