Thanks - I just grabbed an assembled one. Always wanted one like this. Bill -----Original Message----- From: Techtoolslist <techtoolslist-bounces@flippers.com> On Behalf Of William Stillwell Sent: Friday, September 25, 2020 6:40 PM To: Technical Tools Mail List <techtoolslist@flippers.com> Subject: [Techtoolslist] New Tool - eeprom emulaotr I know a few talked about an Eeprom Emulator from Russia, I just picked one up from Kris @ https://mygeekyhobby.com/ ( full source code, github, everything online at https://github.com/Kris-Sekula/EPROM-EMU-NG ) however, he sells kits , assembled kits, and they are on his Tindie , he also has a Groups.IO for it @ https://groups.io/g/eprom-emu-ng .. I got the kit today and built it, works pretty well ( i only tested writing an eeprom and reading back in my eeprom programmer ) .. i will have to give it a go on some actual arcade hardware, but he designed it for use on C64 Carts and Z80 Computer... Kit was cheaper than the russian emulator.. and it came well packaged.. was super easy to build. William Stillwell Board Member - Inspiration labs, Inc. a 501c3 organization Board Member & Co-Founder - Byte Amusement Group // Free Play Florida Arcade & Pinball Show a 501c3 organization _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/