cable info - look here (and some other bits_ <http://www.leopardcats.com/dio/dataio29b.htm> copy of program hacked to run on newer / faster PC's - look here <http://www.arcades.org.uk/techy.htm> (near the bottom of the page) Joseph Magiera wrote:
In an attempt to be able to read & program 2708's, I bought a Data I/O 29B w/Unipak 2B programmer off ebay. No manuals, and "untested" of course, but I can pray that it works. Anyways, I've seen only one of these in actual use before. The guy told me he had trouble getting a proper cable for it. In the end he ended up hacking a cable to get the proper pin configuration. It looked pretty ugly, but it did work. Does anyone know exactly what kind of cable I need to hook it up to my PC? Any other tips or tricks for this beast? Thanks,
Joe joemagiera@ameritech.net
------------------------------------------------------------------------
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
Mike Haaland wrote:
Anyone know how to program an Intel 2763? I've got hundreds of them, but can't find any info on them. Most are pulls from DKJr boards when being upgraded to DDK. They read just like a 2764, but for the life of me, I can't program them. Thanks,
- Mike -
I did a Google newsgroup search and it appears that: 1) Intel doesn't know they made them 2) They were 2764's pre-programmed and labled by Intel for a customer 3) If they don't program at 12.5 volts try 21 volts (program as a 2764) _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
Interesting! Turns out they do program just like a 2764! Not sure why I had all the trouble last time. Thanks for the info. Best, - Mike -
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Rodger Boots Sent: Sunday, March 05, 2006 12:54 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Data I/O 29B cable?
Mike Haaland wrote:
Anyone know how to program an Intel 2763? I've got hundreds of them, but can't find any info on them. Most are pulls from DKJr boards when being upgraded to DDK. They read just like a 2764, but for the life of me, I can't program them. Thanks,
- Mike -
I did a Google newsgroup search and it appears that:
1) Intel doesn't know they made them
2) They were 2764's pre-programmed and labled by Intel for a customer
3) If they don't program at 12.5 volts try 21 volts (program as a 2764) _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
participants (8)
-
Arcadeforever -
John Robertson -
Joseph Magiera -
Martin White -
Mike -
Mike Coates -
Mike Haaland
-
Rodger Boots