AL SACCO_comcast wrote:
Loaded version 6.0 without any problems.... downloaded Ver 6.1 but wouldn't install.... comes up with error os:00f7 during sys disk 1 install............. anyone have this problem......... anyway to verify the disks on net with checksum .............. The images of 6.1 in the archive are damaged.
I have a machine with 6.1 that I have made tar archives of all the files, but I've not had a chance to make install images from them as of yet. Note that there is very few differences between 6.0 and 6.1 I seem to remember only the editor and maybe one other change. Everything else was identical. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
which system disks are serial # sensitive......ver 4...... I have another 9100a with ver 6.1 ...can I copy them over to the other...... finally got service disk v1.4 unserialize from Jimmy......... also need display module for 9100a....any 9100a units for parts out there...... put in a conner cp-3040a in and works fine ...just display bad (not quite right)..... AL ----- Original Message ----- From: "Corey Stup" <Corey@Stup.net> To: "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Sunday, April 02, 2006 3:18 PM Subject: Re: [Techtoolslist] Fluke 9100a
AL SACCO_comcast wrote:
Loaded version 6.0 without any problems.... downloaded Ver 6.1 but wouldn't install.... comes up with error os:00f7 during sys disk 1 install............. anyone have this problem......... anyway to verify the disks on net with checksum .............. The images of 6.1 in the archive are damaged.
I have a machine with 6.1 that I have made tar archives of all the files, but I've not had a chance to make install images from them as of yet.
Note that there is very few differences between 6.0 and 6.1 I seem to remember only the editor and maybe one other change. Everything else was identical.
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
Hi Folks, A Ken Fafrak, who is joining once he gets his email straightened out, has sent me a couple of PDF (Training and Operating) manuals for the Fluke 900 series of IC tester. Now up on the FTP site under 900 (!) in the Fluke section. John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
participants (3)
-
AL SACCO_comcast -
Corey Stup -
John Robertson