Re: [Techtoolslist] Fluke 9100 power supply schematic
Have you asked Shy @ Navatec if he has any info? He does have odds and ends of Fluke gear. John :-#)#
On Dec 4, 2018, at 10:07 AM, Tony Jones via Techtoolslist <techtoolslist@flippers.com> wrote:
Is there any info available on the 9100 switched power supply?
I couldn't see any discussion in the archives or anything on the ftp site. It was originally made by Computer Products, part# XL160-3416/4416. They were bought by Artesyn in the 1990s.
The XL160 seems to exist in other versions: https://www.radwell.com/Buy/ARTESYN%20TECHNOLOGIES/COMPUTER%20PRODUCTS/XL160... https://www.budgetronics.eu/index.php?action=article&aid=23987&lang=EN
I called Artesyn, a) they don't release schematics b) it's an old PSU so they'd never heard of it.
The 9100 FT service manual says: "The Power Supply is an OEM assembly and is replaced as a single part". Which explains the lack of any schematic in the manual.
I've seen the pics on the ftp archive of obviously blown caps. The caps on mine test good, so I need to verify the semiconductors. A schematic would be helpful.
Tony _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I’d be interested to know if you get anywhere with tracking down a schematic. My power supply has a short somewhere that’s not completely obvious. I’ve read that Porchy has adapted an ATX power supply for his, but I’d like to attempt to repair mine first. Justin Sent from my iPhone
On Dec 5, 2018, at 7:57 PM, John Robertson <jrr@flippers.com> wrote:
Have you asked Shy @ Navatec if he has any info? He does have odds and ends of Fluke gear.
John :-#)#
On Dec 4, 2018, at 10:07 AM, Tony Jones via Techtoolslist <techtoolslist@flippers.com> wrote:
Is there any info available on the 9100 switched power supply?
I couldn't see any discussion in the archives or anything on the ftp site. It was originally made by Computer Products, part# XL160-3416/4416. They were bought by Artesyn in the 1990s.
The XL160 seems to exist in other versions: https://www.radwell.com/Buy/ARTESYN%20TECHNOLOGIES/COMPUTER%20PRODUCTS/XL160... https://www.budgetronics.eu/index.php?action=article&aid=23987&lang=EN
I called Artesyn, a) they don't release schematics b) it's an old PSU so they'd never heard of it.
The 9100 FT service manual says: "The Power Supply is an OEM assembly and is replaced as a single part". Which explains the lack of any schematic in the manual.
I've seen the pics on the ftp archive of obviously blown caps. The caps on mine test good, so I need to verify the semiconductors. A schematic would be helpful.
Tony _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
On Wed, Dec 5, 2018 at 7:57 PM John Robertson <jrr@flippers.com> wrote:
Have you asked Shy @ Navatec
yes, of course
if he has any info?
no, he doesn't .... Repair strategy looks to be the usual. oscope and application of general SWPS theory. It's obviously possible to derive a schematic from the physical board, would be a fair bit of work but probably worth it ... one more project for the list. tony _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
participants (3)
-
John Robertson -
Justin R -
Tony Jones via Techtoolslist