Thanks Mike. This is what I was looking for. JB --James Bright www.QuarterArcade.com Restored Arcade Games for your Home ----- Original Message ----- From: "Mike Haaland" <mike@mikesarcade.com> To: <techtoolslist@flippers.com> Sent: Tuesday, April 06, 2004 1:32 PM Subject: RE: PROMLink with Data I/O 29B

...

I'm having problems getting PROMLink to work with my Data I/O 29B with UniPak 2B.

Yes, it does require a null modem adaptor or cable. I generally set the 4 dips inside as follows: 1 & 2 off, 3 & 4 on. Then set the dial on the back to E = 9600 baud. Then set promlink programmer port to 9600/8/n/1. The main problem most folks have is getting the cable right and determining which serial port they have the burner on.

Good luck,

- Mike -

If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo@flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx@yyy.com: (un)subscribe techtoolslist xxx@yyy.com

If you ever want to (un)subscribe yourself with TTL, you can send mail to: <Majordomo@flippers.com> with the following command in the body of your email message: (un)subscribe techtoolslist or from another email account, besides xxx@yyy.com: (un)subscribe techtoolslist xxx@yyy.com