Hickok 241 Arcade Analyzer manual
Pat Danis was kind enough to loan me his original manual to scan. You can find the PDF's here : ftp://ttl.arcadetech.org/TTL/Test_Equipment/Hickok/ Now I just need to get mine running 100% Mike _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
The manual should have been there did I not send you the link. Yikes. On Jan 14, 2014 7:50 PM, "Mike Salay" <msalay@one.net> wrote:
Pat Danis was kind enough to loan me his original manual to scan. You can find the PDF's here : ftp://ttl.arcadetech.org/TTL/Test_Equipment/Hickok/
Now I just need to get mine running 100%
Mike _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Just sobered up enough to realize you aren't talking about a pat9000.. Opps. :) On Tue, Jan 14, 2014 at 5:21 PM, Mike Salay <msalay@one.net> wrote:
Pat Danis was kind enough to loan me his original manual to scan. You can find the PDF's here : ftp://ttl.arcadetech.org/TTL/Test_Equipment/Hickok/
Now I just need to get mine running 100%
Mike _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
That looks like an interesting piece of kit which wouldn't be tooooo hard to repro :) -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Mike Salay Sent: Tuesday, January 14, 2014 5:21 PM To: techtoolslist@flippers.com Subject: [Techtoolslist] Hickok 241 Arcade Analyzer manual Pat Danis was kind enough to loan me his original manual to scan. You can find the PDF's here : ftp://ttl.arcadetech.org/TTL/Test_Equipment/Hickok/ Now I just need to get mine running 100% Mike _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
I have a completely dead Atari 130XE and it just crossed my mind if anyone has ever used a 9010 or 9100 on the Atari 8 bit machines ? I am asking specifically because the A8 machines use a slightly modified 6502 processor and I wonder if the 6502 pod would work OK on the A8 boards. I am aware the 130XE regretfully has a soldered on processor but the older machines have everything socketed, so maybe it's just a theoretic question but an interesting one at least :) Verstuurd vanaf mijn iPad
Op 16 jan. 2014 om 09:19 heeft "David Shoemaker" <davids@oz.net> het volgende geschreven:
That looks like an interesting piece of kit which wouldn't be tooooo hard to repro :)
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Mike Salay Sent: Tuesday, January 14, 2014 5:21 PM To: techtoolslist@flippers.com Subject: [Techtoolslist] Hickok 241 Arcade Analyzer manual
Pat Danis was kind enough to loan me his original manual to scan. You can find the PDF's here : ftp://ttl.arcadetech.org/TTL/Test_Equipment/Hickok/
Now I just need to get mine running 100%
Mike _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
If it should work fine, unless they made some kind of custom hardware changes ( ie, new pins, changes pin signaling, etc ) , but if electrically the modified 6502 is the same as a regular 6502, then you should be ok, You will just not be able to do "Run UUT" as the Opcodes are probably what is altered. -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Andre Huijts Sent: Wednesday, January 29, 2014 6:15 PM To: Technical Tools Mail List Subject: [Techtoolslist] Using Fluke 9010/9100 on Atari 8 bit computers ? I have a completely dead Atari 130XE and it just crossed my mind if anyone has ever used a 9010 or 9100 on the Atari 8 bit machines ? I am asking specifically because the A8 machines use a slightly modified 6502 processor and I wonder if the 6502 pod would work OK on the A8 boards. I am aware the 130XE regretfully has a soldered on processor but the older machines have everything socketed, so maybe it's just a theoretic question but an interesting one at least :) Verstuurd vanaf mijn iPad
Op 16 jan. 2014 om 09:19 heeft "David Shoemaker" <davids@oz.net> het volgende geschreven:
That looks like an interesting piece of kit which wouldn't be tooooo hard to repro :)
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Mike Salay Sent: Tuesday, January 14, 2014 5:21 PM To: techtoolslist@flippers.com Subject: [Techtoolslist] Hickok 241 Arcade Analyzer manual
Pat Danis was kind enough to loan me his original manual to scan. You can find the PDF's here : ftp://ttl.arcadetech.org/TTL/Test_Equipment/Hickok/
Now I just need to get mine running 100%
Mike _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
participants (5)
-
Andre Huijts -
David Shoemaker -
Kevin Moore -
Mike Salay -
William Stillwell