

David Shoemaker wrote:Interesting, looks like it could be handy for some of the older stuff. Needto come up with a Jamma card, hrmmm that won't work. The interface boardonly goes up to 50 pins.Well I went and dug mine out tonight. Looks like I have a set of basicallyuseless cards for me:300A-F, 301A, 302C 300ABCDEF Credit Board RockolaPDF <http://www.flippers.com/pdfs/kk-300-rock-ola-credit.pdf>No301A Popularity Board RockolaPDF <http://www.flippers.com/pdfs/kk-301-rock-ola-pop.pdf> No302C Logic Mech. Bd. RockolaPDF <http://www.flippers.com/pdfs/kk-302-rock-ola-logic.pdf> NoA 185B 185ABC Gun Fighter MidwayPDF <http://www.flippers.com/pdfs/KK-185A_B_C-GunFighter.pdf> Yes-185ABAnd a 222C 222AC 280 Zzzap, Laguna Racer MidwayPDF <http://www.flippers.com/pdfs/KK-222A_C_185B-280Zzzap.pdf> Yes-222ACSo two partials and a whole set of Rockola stuff and I don't have a jukebox.Wonder if anyone around here does? JI also came across a KK Prom Test 1 unit with some socket cards. Anyonehave any information on that?David
The KK Prom Test 1 was a Eprom verifier requiring the use of a Signature Analyzer (KKs or HPs both are fine). I'm adding the sheet for that on the KK page on Flippers now, along with the PP-400 programmer and MOD pages for cards 174 and 215.
http://www.flippers.com/kurzkasc.html
More to come as folks send me stuff!
John :-#)#-----Original Message-----From: techtoolslist-bounces@flippers.com[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Jeff AndersonSent: Tuesday, February 28, 2012 9:49 PMTo: Technical Tools Mail ListSubject: Re: [Techtoolslist] Kurz Kasch PDFs updated on FlippersI have most of the KK cards including most/all the 400-series so I should beable to fill in a few holes in the PDF list as well..I've replaced the caps on the unit I typically use, though I have anotherunit I found at a dist that had a switcher tastefully hacked on, I supposethat's another way to do it..David: I use them fairly regularly and I have a couple pics of them upalready:Video pinball; video is on sony monitor at the far right (speaker hooks upto the flying leads):<http://www.cybersled.com/albums/arcade-games/videopinball_bench.jpg>http://www.cybersled.com/albums/arcade-games/videopinball_bench.jpgSI:<http://www.cybersled.com/albums/arcade-games/midwaytest12.jpg>http://www.cybersled.com/albums/arcade-games/midwaytest12.jpgSpace Encounters w/sound (not running on a rev K main):<http://www.cybersled.com/albums/arcade-games/midwaytest2.jpg>http://www.cybersled.com/albums/arcade-games/midwaytest2.jpg247C midway PS tester:<http://www.cybersled.com/albums/arcade-games/midwaytest10.jpg>http://www.cybersled.com/albums/arcade-games/midwaytest10.jpgOn Tue, Feb 28, 2012 at 9:22 PM, David Shoemaker < <mailto:davids@oz.net>davids@oz.net> wrote:Can you send me a picture of one of these? I am curious how they set itup.I haven't actually seen any of these in action (though I do have aunit and a couple cards).
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/