----- Original Message -----

From: Chris Toseland

To: Technical Tools Mail List

Sent: Thursday, November 30, 2006 2:54 PM

Subject: Re: [Techtoolslist] Fluke 9010

Hi AL,

 

Yes I'm still looking for a replacement CPU for the tape unit. However the days of me having access to equipment to program one are long gone.

 

Chris

-----Original Message-----
From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of AL SACCO_comcast
Sent: 27 November 2006 04:20
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Fluke 9010

Chris ,

still looking for 8041/8741 mpu for fluke 9010 tape reader ?

if so , let me know.....

AL

----- Original Message -----

From: Chris Toseland

To: TechToolsList@flippers.com

Sent: Sunday, November 19, 2006 7:47 AM

Subject: [Techtoolslist] Fluke 9010

Hi folks,

 

This maybe a long shot but does anyone have or can duplicate the controller CPU for the tape drive unit on a 9010?

My tape unit doesn't work, I've checked the sensors and even tried driving the CPU input pins directly all to no avail so I and can only assume that the CPU is dead.

 

Thanks

 

Chris

---

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist

---

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist