how to use fide?

in Êthe fide script gen
Êcan i copy and paste the script right off the fide website into
Êfide and send it to the 9010 ? if not what needs to be done to it
Êor how is it done

 great stuff on the 9010 in your email thanks
Ênow with the learn function i can not use it to learn the info on
Êthe board to compare the 2 boards thank you so much for the info
Êtony

>ÊOn Fri, 22 Apr 2005 15:33:39 -0400, Mark Hooks wrote:
>>ÊTony,
>>
>>ÊThe script generator on the FIDE site is great.ÊÊIf you need to
>>Êverify the memory map, you can hook up the 9010A, power up the
>>Êknown good board and hit the Learn key.ÊÊIt will ask you what
>>Êstarting address you want, type in 0 and hit the enter key.ÊÊThen
>>Êit will ask for the ending address, type in FFFF and hit the enter
>>Êkey.ÊÊThe 9010A will read the entire board to locate the RAM, ROM
>>Êand input/output addresses.ÊÊWhen the display says "Learn OK" hit
>>Êthe RAM button to show the ram locations, the ROM button to
>>Êdisplay
>>Êthe ROM locations and the I/O button to display the I/O locations.
>>
>>ÊMark Hooks
>>Ê850-894-8103
>>>Ê----- Original Message -----
>>>ÊFrom: tony
>>>ÊTo: Technical Tools Mail List
>>>ÊSent: Friday, April 22, 2005 11:09 AM
>>>ÊSubject: [Techtoolslist] fluke 9010a and sega outrun
>>>
>>>
>>>Êi am not that good with the fluke scripts
>>>Êcan someone help setting up a fluke
>>>Êwith a fluke 9010a and 1 known good board (sega out run) what is
>>>Êthe best way to record the good board in the fluke 9010a i have
>>>Êthe rs232 on the back and fide and risk
>>>Êthrough the 68000 and use it as a script to run it on a bad
>>>Êboard
>>>Ê(Sega out run) or does anyone already have a script done for
>>>Êthis
>>>Êany help would be great thanks tony
>>>
>>>Ê_______________________________________________
>>>ÊTechtoolslist mailing list
>>>ÊTechtoolslist@flippers.com
>>>Êhttp://seven.pairlist.net/mailman/listinfo/techtoolslist