It's not a pod problem, I can use the fluke normally w/o problem. I'm trying to hook up the rs232 to a computer to upload scripts. It only resets after hitting enter/yes after doing an Aux/if, read. while trying to send a script to the fluke.

I've been trying to read up on the program to test the rs-232, but I've not programed the fluke manually before, so It get's a little confusing manually entering the program.

I have checked the power supply for problems etc when I first got it about 6 months ago.

On Sun, Jan 3, 2010 at 2:28 PM, John Robertson <jrr@flippers.com> wrote:
Kevin Moore wrote:
Ok the holidays are over, and I'm back to trying to get my Fluke hooked up
to the computer so I can do scripts.

Problem I'm having is that when I enter the following Aux/if , Read , Yes
the fluke resets after 1-2 secs.

It will also do this with the serial port unplugged.

I'm wondering if the is a normal action, like the Fluke is looking for a
signal from the com port to wait, or if there is a problem with my fluke..

Thanks,

Kevin
 
Try leaving a pod hooked up in Self-Test and leave it running for a while - the machine should not reset...

If it does then something may well be wrong with the 9010 and I would check the power supply first - looking for failing caps is the first item on the check list.

John :-#)#
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/