You have to check the manual for the pod you are using to identify what the error is for the bits that are set on the CTL BTS. Each bit represents one monitored function - reset, IRQ and other control lines. This is also on the pod.

One other thing is that some of the scripts in the archive are designed for the Z80-QT pod as it allows a faster RAM test so you might want to keep an eye out for that pod...

John :-#)#

At 04:45 PM 29/10/2002 -0500, sales@htbsusa wrote:

i need info on using the fluke 9010a
I am working on pole position 2 brds I subscribed to the group and got
.

ok got the pole.h in the fluke and went through the tests on the left keys ,, I/o,,rom,,ect ,,, ALL PASS but when I ran the bus test it came up with
CTL ERR@ 0020-LOOP
MORE
CTL BTS 00000000 00010000

IF I PRESS CONT BUTTON I GET

CTL ERR @ 0004- LOOP
MORE
CTL BTS 00000000 00010000
THEN CONT BUTTON
BUS TEST FAIL

I do not under stand theses address or is this the wrong way to run the pole.h or is there another test to run,, these are all I could figure out
thanks for all your help
let me know what you think
Tony