Hey all. First time posting to this list. I haven't seen many posts recently, but I am starting to use a Fluke 9010A. I've been spending a lot of time reading the manuals, but of course I'm also playing with the Fluke to get some "hands on" experience. I'm trying to write a simple "Hello World" type of program to make sure my computer and Fluke are set up correctly and communicating.

I'm using the RKSIC program and believe that I have the COM port settings matching the fluke settings. I have compiled my simple program and I am attempting to load the programmer. RKSIC says to press the "AUX I/F" , "READ", "YES." When I press the AUX I/F button, I get a message saying "NO IO INFO." Is this correct? I wasn't able to successfully program the unit. When I follow the instructions from the RKSIC program, I end up with a "9000A REMOTE MODE ERR091." It seems like the Fluke isn't set up to receive the program correctly. I need to confirm that the pinouts of the serial cable are correct (I believe they are). My firmware version is 2.0, displayed on boot up. This may be a little old. (I'm worried that the documentation won't match the messages I see.)