Nah, don’t worry about stripping it down, I’m gonna take mine apart and do the tests on it see if I can see what’s up with it. If it’s a fluke programmed one then I won’t have anything – sorry! Was just thinking that I have a few boxes of unknown stuff and some are 40 pin :o)


On 19/11/06 14:48, "Chris Toseland" <Chris@muppzlab.co.uk> wrote:

Hi Martin,
From memory it was a mask programmed 804x series, I'd need to strip it down again to be 100% sure.
Cheers
Chris

 
-----Original Message-----
From:  techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com]  On Behalf Of Martin White
Sent: 19 November 2006  14:16
To: Technical Tools Mail List  <techtoolslist@flippers.com>
Subject: Re: [Techtoolslist]  Fluke 9010

Chris,

What’s the cpu? The service manual shows  “536094” but not too sure if this is a Fluke part number or what? Is that the  actual number on the cpu?

Just read through some interesting stuff on  the tape drives in the service manual so I may open mine up at some point and  see if I can work out what’s up with the drive. Used to work fine until it was  stored for a few months. When it came out of storage it no longer works. Never  really bothered about it too much since I have the RS232 option but it would  be nice to get it going again!

Martin.


On 19/11/06 12:47,  "Chris Toseland" <Chris@muppzlab.co.uk> wrote:

 
Hi  folks,

This maybe a long shot but does anyone have or can duplicate the  controller CPU for the tape drive unit on a 9010?
My tape unit doesn't  work, I've checked the sensors and even tried driving the CPU input pins  directly all to no avail so I and can only assume that the CPU is  dead.

Thanks

Chris

 
_______________________________________________
Techtoolslist  mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist


--  
Guddler's Domain
http://www.guddler.co.uk


_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist


--
Guddler's Domain
http://www.guddler.co.uk

 _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist