nearest to it is probably the 8086 since that already multiplexes the address and data lines (ad0-ad15).

On 12 April 2016 at 15:48 John Robertson <jrr@flippers.com> wrote:


Has anyone here figured out an adapter for one of the Fluke 9010 pods to
be able to emulate the multiplexed address and data lines of the T11? I
am just starting to look at this as I need to access these lines to
service an old video game board that used the T11 as the main processor.
Any of you not familiar with the DEC-T11 it is a 40 pin device that
emulates a PDP11 as far as I can understand.

I don't know anything about the PDP11 technically though so am pretty
much hacking my way through inventing a troubleshooting procedure, which
the manufacturer of the game - Atari (System 2, Paperboy, AFB, etc,) -
did not provide.

Just flinging this out in the hopes someone here can help.

Thanks,

John :-#)#
--
How to subscribe or unsubscribe from TTL
http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/