Z80 is for 4MHz CPUs (Z80 and Z80A), Z80AA is for 6MHz - Z80Bs, and the
Z80-QT is the QuickTest version. Quick test being far faster (20X!)
RAM and ROM tests. The docs for that pod (and most of the others -
I'm currently scanning in the Z8000 pod 1/2 way through it) are in the
PDF section of the FTP site. You should do some digging around there,
lots of jewels for the 9010 and 9100. Plus some Arium ML4100/4400 logic
analyzers.
ftp.flippers.com/TTL
John :-#)#
At 01:03 PM 17/11/2002 -0800, David Shoemaker wrote:
Ah to be
a newbie again :) I didn't know about the FTP site.
This will keep me busy for a
while.
So a question, whats the difference between the
QT/AA/standard pods?
- ----- Original Message -----
- From: John Robertson
- To:
techtoolslist@flippers.com
- Sent: Sunday, November 17, 2002 12:41 PM
- Subject: Re: Dig Dug & 9010
- There is a Galaga script on the FTP site.
- ftp.flippers.com/TTL/Fluke and go into the Scripts... sub-directory. This is written for the Z80-QT so some of the tests need to be adjusted for a regular Z80(or AA) pod.
- John :-#)#
- At 12:33 PM 17/11/2002 -0800, David Shoemaker wrote:
- Great, thanks.
-
- Um, has anyone done Galaga? :)
-
- I have the pod hooked up to the #1 CPU at this point, this is letting me check one range of ROMs and the video memory. So far so good.
- ----- Original Message -----
- From: Kev
- To: David Shoemaker ; techtoolslist@flippers.com
- Sent: Saturday, November 16, 2002 8:57 PM
- Subject: Re: Dig Dug & 9010
- Think Galaga....
- -----Original Message-----
- From: David Shoemaker <davids@oz.net>
- To: techtoolslist@flippers.com <techtoolslist@flippers.com>
- Date: Saturday, November 16, 2002 10:13 PM
- Subject: Dig Dug & 9010
- OK now that I have my Missile Command board working with Kev's help. Time to move on to my Dig Dug. This one will be tricky as it has 3 Z80's on it.
- Anyone have any hints for 9010A setup / usage?
- David