So far all I've found on the tapes are the Tape MERGE binary, the Unsigned Add binary, and the Frequency Counter binary. All work - the frequency counter is very fast at recognizing the freq, goes from 10Hz to 6mHz. Neat!

I'm too tired...the BINARY programs are sent to the RS-232 by the command AUX I/F - WRITE. The BINARY code is then dumped out the RS-232 port. The RKSIC program was calling it "Receive Hex File from 9010A"

So I WILL be able to save the Utilities (above) and store them on the FTP site! Sunday...

John :-#)#

How to subscribe or unsubscribe from the list:

To do either you send email to "MajorDomo@flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)...