Go to the FTP (ftp://ftp.flippers.com/TTL/Fluke/PDFs/) site for TTL and download the introductory/training lessons for the 9010. These should help you with many of your questions...they use an old 8080 computer that is NLA, but you can substitute almost any microprocessor trainer for this.

I plan to use the Heathkit trainers for my staff but have not set up a guide yet - the only changes are the memory locations and checksums.

John :-#)#

At 11:02 AM 16/09/2003 -0700, hitech wrote:

I am having a hard time understanding how memory locations and how registers work,, is their a book or courses that anyone can suggest , no one teaches this any more, I took a digital course at the local collage ,they just touched on this part not enough to really understand and they did not go over memory

I want to be able to use my fluke 9010 to trouble shoot these arcade boards,, but when it gives loop info how to trace this back to a chip ,, any help would be great ,

how did all of you learn this ?????

How to subscribe or unsubscribe from TTL

To do either you send email to "MajorDomo@flippers.com" and in the body you state either "Subscribe techtoolslist" or "Unsubscribe techtoolslist", note that the Subject is "" (Blank)...

FTP site is: ftp://ftp.flippers.com/TTL/