IIRC, there is a problem with the original ROMs being too slow to be properly tested... I had them on my bench, but I don't recall if I ever got them to run via the Run UUT command. I got a stack here which I should go through some day... some day...

JB

---

From: Martin White <martin@guddler.co.uk>
Sent: Tuesday, June 28, 2005 5:04 PM
To: techtoolslist@flippers.com
Subject: Re: [Techtoolslist] Where are the archives??

Crap! Why do i always do that!??

Okay, just after posting, found the archives on the vectorlist archives page.
Or at least the thread that i was after anyway.

Faster than factory eproms it is then :o)

Cheers all,
Martin.

On Wednesday 29 June 2005 01:05, Martin White wrote:
> As title.
>
> Going here:
> http://seven.pairlist.net/pipermail/techtoolslist/
>
> Tells me that no messages have been posted to this list yet, which i know
> to be far from the truth.
>
> I have a bunch of MCR2 boards in to fix and i want to refresh my memory as
> to why my 9010a can't run them. I know it's been covered before because for
> starters, I'm sure i raised it, well over a year ago. And I'm pretty sure
> someone else did more recently too. I changed PCs a while ago though so
> don't have a personal archive.
>
> I've fixed one set, but don't really want to do them all without the fluke
> unless i really, really have to!
>
> Any help appreciated!
>
> Thanks,
> Martin.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist