Perhaps not a big help but here in Vancouver, BC we have a prototype circuit board manufacturer that makes VERY nice two layer PCBs (and silkscreen) for $1US/sq inch. http://www.dyco-circuits.com/ Two PCB's 5" X 9" (12.75cm X 23cm) for $114US - you can put as many smaller boards as you like on those two panels and cut out later...

I've been very pleased with their results.

John :-#)#

At 09:00 AM 30/12/2003, pc2jamma wrote:

Hi Guys !

Does anyone know some source for prototype PCB. I'm building one MB14241 daughter card, and now it's time to test it. I don't want to wire about 160 nets using wire warp... it's so boring...

I'm trying to contact Futurlec (www.futurlec.com) but with no success..

Thank you

Jose Luiz Martins

If you ever want to (un)subscribe yourself with TTL, you can send mail to:
<Majordomo@flippers.com>
with the following command in the body of your email message:
(un)subscribe techtoolslist
or from another email account, besides xxx@yyy.com:
(un)subscribe techtoolslist xxx@yyy.com