Ok I've found a U2 to be bad the MC14411 the D/A convertor, on the RS-232 board. So now the fluke doesn't reset,

The FIDE program is giving me an error of invalid port. Not sure how that could be since there is only 1 serial port, and I've got the program setup to use it.

So I'm going to have to go through my setup again and double check everything, but progress is being made slowly.

Kevin


On Tue, Jan 5, 2010 at 11:33 AM, Kevin Moore <talon.k@gmail.com> wrote:
Yeah the script is the next thing I'm going to try as soon as I figure out how to manually program this thing. Which is what I got the Rs-232 optioned one for in the first place, to avoid having to type on that keyboard more than I have to.

Kevin



On Tue, Jan 5, 2010 at 10:29 AM, John Robertson <jrr@flippers.com> wrote:
Kevin Moore wrote:
It's doing a power on reset, after pressing "Aux i/f", then "Read", then
"Enter". It will state Receiving, then reset after about 2 secs. It then
comes back on stating Fluke 9000 restarted, self test ok.

Kevin



On Tue, Jan 5, 2010 at 8:28 AM, Tim Matthews <trmatthe@gmail.com> wrote:

 
-----Original Message-----
From: techtoolslist-bounces@flippers.com
Subject: Re: [Techtoolslist] 9010a RS232 problem?

It's not a pod problem, I can use the fluke normally w/o problem. I'm
trying
to hook up the rs232 to a computer to upload scripts. It only resets
       
after
     
hitting enter/yes after doing an Aux/if, read. while trying to send a
script
       

If you have a second 9010 and a Z80 pod then you can use it to test the RS-232 card in your current machine - I seem to recall a script for doing that using a loop-back jumper...buried in the 9010 service manuals.

John :-#)#

Hi Kevin,

Can you describe exactly what is being shown on the Fluke display when it
fails?
I'm not sure if you are describing the Fluke doing a Power-On Reset, or
whether it's
just dropping out of RX mode.

cheers
tim
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

   
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/


 


--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
               www.flippers.com "Old pinballers never die, they just flip out"