Sometimes the label is on the mounted side of the fan so you have to take it out to see it. Apologies if you already did that... I support technology in my day job (I'm 'working' as I type this) so at least I didn't ask you if your computer was plugged in. 😃



-------- Original message --------
From: Tony Jones <tony@tonyjones.com>
Date: 7/14/16 12:10 PM (GMT-07:00)
To: John Robertson <jrr@flippers.com>, Technical Tools Mail List <techtoolslist@flippers.com>
Subject: Re: [Techtoolslist] 9010 fan question

On Thu, Jul 14, 2016 at 10:43 AM, John Robertson <jrr@flippers.com> wrote:

> Depending the fan design there may be a removable rubber seal under the fan
> label (if in the middle of the fan). I peel back the label, remove the seal
> and then put a couple of drops of synthetic motor oil (around 20W) and let
> it soak in a while then spin the fan manually back and forth to work the it
> back into the bushings. Then seal it back up.

No, not on this fan.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
https://pairlist7.pair.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/