Stuff has arrived and here is a list:

TAPES:
6502 POD FIXTURE
6800 POD FIXTURE
TK80 + DEMO
TECHPAD FOR IBM PC GFI PRINTER ADAPTER
2 X ASYNC.SIG.OPT 764977 #332-2235
APPLE II DIAGNOSTIC TROUBLSHOOTING 1982
A SEALED TAPE #338-8085 ??
TECHPRO FOR IBM PC SYSTEM DIAGS
6802 POD/8085
TECHPRO FOR IBM PC'S FLOPPY DISC CONTROLLER
8080 POD/Z80POD
3 X CSG TEST TAPE 764977 9000A-006K #324-1385
9010A WORKBOOK
TBS21-24,91 ,92, 93, 94, 95, 96
TECHPRO FOR IBM PC GFI SYSTEM BOARD
FIXTURE TESTS Z80/8080POD
MILLENIUM Z80 POD/9010A - 8502A (6502A?)
6502 POD/6800 POD
8085 POD
T.G.S.T. ???
KON 3 1700 ???
Z80 POD TEST TAPE
---end of tapes---

Z8 I/F ADAPTER 9000-200/AB pod

Service test fixtures:
Z80
6800/6802
8085
6802
8080

Plus some cables and bits and pieces.

John :-#)#

At 03:14 PM 30/05/2002 -0700, John Robertson wrote:

I have just been offered an interesting pile of test gear for the Fluke pods.

"1 each: 9000 series interface pod test fixtures for 6800 (6502), 8502, 8080, 8085, and Z80 pods.
These fixtures are used to verify proper operation of the 9000 interface pods. Each fixture
consists of test points for all uut cable lines, a rom to execute a 'Run UUT' program and a
divider circuit to simulate power supply faults. The book has program listings and instructions
for use.

Also there is an incomplete z8 pod, 28 assorted test tapes including some factory diagnostics
a tape drive alignment fixture block, assorted pod cables in various states of bent pins."

So, when this all arrives I'll tell you more. I'm posting the pictures on the ftp site - no drooling!

ftp://www.flippers.com/Fluke and check the jpgs...

John :-#)#